Securplumb Flexi Tap Connector With Valve Pack 2 300 x 15 x 10mm

Securplumb Flexi Tap Connector With Valve Pack 2 300 x 15 x 10mm

Securplumb Flexi Tap Connector With Valve – 300mm x 15mm x 10mm (Pack of 2)

Product Overview:

The Securplumb Flexi Tap Connector With Valve is a high-quality plumbing solution designed to provide flexible and secure connections between copper or plastic supply pipes and basin or kitchen taps. Supplied as a convenient pack of two, these flexible braided hoses measure 300mm in length and are configured with 15mm compression ends and 10mm tap tail connectors, making them suitable for a wide variety of domestic tap installations.

An integrated isolation valve on each connector allows for quick shut-off of the water supply to individual taps, simplifying maintenance and repair tasks without the need to isolate the entire plumbing system. The flexible hose design makes installation fast and straightforward, especially in confined or awkward spaces where rigid pipework may be impractical.

Product Specifications:

• Brand: Securplumb

• Product Type: Flexible Tap Connector with Integrated Isolation Valve

• Pack Size: 2 Connectors

• Length: 300mm

• Inlet Connection: 15mm compression

• Outlet Connection: 10mm female tap tail (suitable for most pillar and monobloc taps)

• Material: Braided stainless steel with brass fittings

• Valve Type: Quarter-turn isolation valve integrated into connector

• Boxed Weight: 175g (total pack)

• Application: Domestic plumbing, tap installation, maintenance access

Key Features:

• Flexible Hose Design: Eases alignment and connection in tight or restricted areas

• Integrated Isolation Valve: Enables independent shut-off to taps for servicing or repairs

• Corrosion-Resistant Build: Durable stainless steel braid over inner rubber hose ensures long life and reliability

• Time-Saving Installation: Minimizes cutting and soldering of rigid pipework

• Secure Compression Fittings: Leak-proof connections with standard tools—no soldering or heat required

• Universal Fit: 10mm tap tails compatible with most standard UK taps

Common Applications:

• Connecting kitchen or bathroom basin taps to 15mm pipework

• Replacing old or rigid tap connectors with modern, flexible alternatives

• Allowing for movement in freestanding basins or sinks

• Simplifying tap maintenance with local isolation

• Ideal for both new plumbing installations and retrofits

Installation Instructions:

1. Turn Off Water Supply: Before installation, shut off the main water supply.

2. Prepare Pipe Ends: Ensure the 15mm supply pipe is cut clean and deburred.

3. Fit Compression End: Attach the 15mm compression end to the pipe using the included olive and compression nut. Tighten securely with a wrench.

4. Connect Tap End: Screw the 10mm female fitting onto the corresponding tap tail thread. Use a fiber washer if required.

5. Check Orientation of Isolation Valve: Ensure the valve lever is accessible and aligned correctly for operation.

6. Test System: Slowly restore water supply and inspect for any leaks.

Tip: Always support pipework to prevent stress on connectors, and do not overtighten connections.

Care & Maintenance:

• Regular Inspection: Periodically check for any signs of leakage or deterioration of the braided hose.

• Exercise the Valve: Turn the valve on and off occasionally to ensure it does not seize up.

• Avoid Excessive Bending: Maintain smooth, natural curves in the hose during installation—do not kink or twist.

• Replace When Worn: Replace hoses every 5–10 years or sooner if wear or damage is observed.

Frequently Asked Questions (FAQ):

Q1: What is the valve used for?
The integrated quarter-turn valve allows you to isolate the water supply to an individual tap, making maintenance or replacement quick and easy without affecting the rest of your plumbing system.

Q2: Are these hoses suitable for hot and cold water?
Yes, the hoses are designed to carry both hot and cold water. They are typically rated for temperatures up to around 85°C, but always check your system specifications.

Q3: Can I use this with plastic pipe?
Yes, with the appropriate pipe inserts and adherence to manufacturer installation guidelines, these connectors can be used with plastic pipe systems.

Q4: Do I need any special tools for installation?
Only basic tools are required—typically a pair of adjustable spanners or wrenches for the compression fitting and tap tail.

Q5: Are washers included with the connectors?
In most cases, integrated rubber seals are built into the tap connectors. If not, standard fiber or rubber washers can be used to ensure a tight seal.

Conclusion:

The Securplumb Flexi Tap Connector With Valve 300mm x 15mm x 10mm (Pack of 2) provides a smart, efficient solution for tap installations in kitchens and bathrooms. With its flexible design, built-in isolation valves, and strong, corrosion-resistant materials, it’s the ideal choice for both professional plumbers and DIY installers seeking long-lasting, maintenance-friendly plumbing components.