Securplumb Compression Elbow

Securplumb Compression Elbow – Precision Angled Connections for Modern Plumbing

The Securplumb Compression Elbow is a high-performance plumbing fitting designed to create a robust, leak-resistant 90-degree turn in copper or plastic pipework systems. Whether you’re re-routing pipe runs, installing around obstructions, or completing a compact system design, this elbow fitting ensures both performance and reliability with no need for heat or solder.

Available in 10mm, 15mm (single and pack of 10), and 22mm sizes, the Securplumb Compression Elbow is ideal for a wide range of domestic and commercial plumbing applications, including potable water, sealed heating systems, and general pipework.

Product Variants and Specifications

• Material: Corrosion-resistant brass

• Angle: 90° elbow

• Fitting Type: Compression

• Certification: WRAS Approved (15mm Pack 10 variant)

• Pipe Compatibility: Suitable for use with copper and plastic pipe (with inserts)

Key Features and Benefits

✔ Clean, Flame-Free Installation

No soldering or adhesives required—compression fittings are installed using only basic hand tools, making them ideal for use in residential or safety-sensitive areas.

✔ Reliable Sealing

The included olive and brass nut system compresses around the pipe to form a watertight seal, suitable for hot and cold water systems as well as sealed central heating installations.

✔ High Durability

Made from precision-engineered brass, these elbows withstand the thermal and pressure stresses typical of UK plumbing systems.

✔ WRAS Certified (15mm Pack 10)

The 15mm Elbow (Pack of 10) is WRAS approved, confirming its compliance with UK standards for potable water safety.

✔ System Flexibility

Enables directional changes in pipe layouts without needing to bend pipe manually or use additional tools.

Compatible Applications

• Domestic water supply lines (hot and cold)

• Central heating circuits

• Bathroom and kitchen pipe rerouting

• Boiler and radiator installations

• Undersink and concealed pipework

• Plastic and copper piping systems (with appropriate inserts)

Size-Specific Use Cases

• 10mm: Ideal for microbore heating systems and space-constrained installations

• 15mm: Standard domestic plumbing size, commonly used for radiators, sinks, and taps

• 22mm: Suited for high-flow areas such as mains feeds, showers, or bath supplies

Installation Instructions

1. Prepare the Pipe

   • Cut the pipe square and deburr both inside and outside edges.

   • Clean pipe ends thoroughly.

   • For plastic pipe, insert a manufacturer-approved pipe stiffener (insert).

2. Assemble the Fitting

   • Slide the compression nut and olive onto the pipe.

   • Insert the pipe into the elbow body until fully seated.

   • Hand-tighten the nut, then secure further with a spanner—tighten about one full turn.

3. Test the System

   • Pressurize the circuit and inspect for leaks.

   • Tighten slightly further if required. Avoid over-tightening.

Handling and Maintenance

• Accessibility: All compression fittings should remain accessible for periodic inspection or adjustment.

• Reusability: The fitting body can be reused; replace the olive each time for optimal sealing.

• Cleaning: Clean and dry pipe ends before installation for best results.

• Avoid PTFE Tape on Threads: Compression joints seal via the olive, not the threads.

Frequently Asked Questions

Q: Can I use this fitting with plastic pipe?
Yes. Always use the correct internal pipe support inserts when connecting to plastic pipe.

Q: Is this suitable for potable water use?
Yes. The brass fittings are suitable for potable systems. The 15mm Pack of 10 variant is WRAS approved for drinking water safety.

Q: Can it be used in sealed central heating systems?
Yes. The compression elbow is ideal for use in both open vented and sealed heating systems.

Q: Do I need sealant or PTFE tape?
No. Compression fittings rely on the olive to form the seal. Thread tape is not necessary and may hinder correct tightening.

Q: Can I bury this in a wall or floor?
Not without access. All compression fittings should remain accessible for future maintenance or inspection.

Why Choose Securplumb Compression Elbows?

The Securplumb Compression Elbow range is engineered to deliver strong, reliable, and hassle-free 90° directional changes in pipework, with no flames, fluxes, or specialist tools required. Designed for compatibility with modern plumbing systems and backed by a reputation for quality, these elbows are a staple in any professional or DIY plumber’s kit.

Whether you’re installing a new radiator, re-routing underfloor pipes, or managing a complex bathroom layout, trust Securplumb for seamless system design, WRAS-certified safety, and long-term durability.